The Key Points Using of Rock Gold Ball Mill

1. Gold selection equipment determines the appropriate ratio of material, balls and water. The loading of the grinding body is an important factor affecting the ball mill. If the loading is small, the impact and grinding effect on the material will be reduced. On the contrary, if the loading is too large, the feeding amount will decrease, and the interaction of the grinding body will increase. Efficiency will decrease. After the rock gold mine is exposed to the ground, after long-term weathering and denudation, it is broken into gold particles and gold powder for gold selection equipment, and then it is transported by wind or water flow, gathers up, and deposits on lakesides and coasts to form alluvial and diluvial mineral processing methods. placer gold deposits. 2. It is necessary to ensure the proper cylinder speed of the gold selection equipment. If the speed is slow, the centrifugal force will become smaller and the friction force will also be small. At the same time, the grinding body cannot rise with the wall of the cylinder, and it is impossible to form a throwing motion. On the contrary, if the speed is too fast , the centrifugal force and friction will increase, the grinding body will rotate close to the inner wall of the cylinder, the throwing motion will not be formed, the grinding body will not collide with the raw material, and the efficiency will decrease, so the speed control of the cylinder is very important.