Welcome to GoldMaster

  • May 25, 2022

What should be paid attention to when operating gold mining machinery and equipment



What should be paid attention to when operating gold selection machinery and equipment: Gold selection machinery and equipment operators need professional training, so what should we pay attention to when operating, first of all, technical training needs to be carried out before the installation of sand gold selection equipment, comprehensive and sufficient Understand what principle the gold selection equipment room uses to select gold, and be familiar with its performance, start-up process and working process. When starting up the gold selection equipment, you must pay attention to the start-up sequence. After opening, professional staff should check it during operation, and Operators must thoroughly master the above technologies. During the installation of gold selection equipment, first of all, it must ensure the firmness of the foundation and fix it with cement and ground cages. If the operation is frequently changed, the bottom of the equipment is generally equipped with wheels. Other methods should be used to fix it. Note that every time you go to a location, you need to ensure that the conveyor belt and other equipment are on the same level. Regularly check the lubrication. The lubricating oil itself has a life span to prevent deterioration. Check whether the parts of each part are loose and collided. The place should be repaired in time. After the gold selection equipment is turned on, it must be idling for a period of time to ensure that there is no abnormality. Slowly put in the ore to start the operation. Remember not to invest too much at one time, which will cause the machine to be blocked and crowded. Observe the operation of the sieving system of the grading equipment and feed materials evenly. If vibration, noise, excessive temperature of the bearing and the machine body, and outward spraying of materials are found, stop the machine immediately to check and eliminate the fault before continuing to work. The chute is within the specified time. It must be cleaned to avoid unnecessary tailing for a long time.

Quickly Inquiry

GoldMaster