Placer gold dryland gold washing machinery and equipment

There are two main types of dryland gold panning equipment, one is gold panning for placer gold, and the other is gold panning for mine crushing. Alluvial gold beneficiation equipment is mainly used in places with rivers or in areas where sand and other raw materials are mainly used, especially on both sides of rivers and dry riverbeds. Mine crushing equipment is used in mines with gold mines. It is necessary to crush stones into fine sand before gold selection. The gold selection equipment we produce has advanced technology, reasonable structure, reliable operation and convenient maintenance. After years of production practice, it has been proved that the alluvial gold produced by this kind of gold panning equipment has the characteristics of high mechanization, large production capacity, low investment and quick results. It is an advanced mining and selection equipment for alluvial gold production. Gold panning machinery and equipment are mainly loaded with loaders or trucks. If trucks are used, a steep slope needs to be built, or the loading hopper should be placed at a lower position. The loading hopper of a loader or forklift is relatively high, and the material enters the loading first. The funnel passes through a drum-type sieve to remove relatively large impurities. The waste is generally transported to the site by a conveyor belt, generally 5-10 meters, and the fine material is leaked through the sieve hole. The gold pan is just under the sieve. Side chute or double-sided chute, during the rotation of the trommel screen, there is a jet to wash the sieve and the chute to wash away the sediment, the gold is left on the gold carpet, and the waste is discharged from the chute. If sand is needed, a water wheel can be added After the sand washing machine removes the water, it is transported to the site by the conveyor belt.

Dry land gold panning equipment, the processing capacity is generally 50-300 cubic meters per hour, the diameter of the sieve is generally 1 meter to 2 meters, the length of the sieve is generally 3 meters to 6 meters, the chute is generally 2-8, and the conveying distance is generally 5-10 rice. This kind of gold panning equipment has a high gold recovery rate, and it hardly runs out of the mine, and the gold recovery rate can reach more than 90%. At the same time, iron powder can be selected to wash yellow sand; less investment and greater income.

For the purchase of alluvial gold equipment, if you are not particularly clear, you can choose some experienced people to consult. In this way, it will not cause a relatively large impact when purchasing. Otherwise, it may have a great impact on your own operation and use. It will affect the efficiency of work, so this point should be paid attention to when purchasing. Another thing is to choose a more guaranteed business, so that the quality of the goods is better.